This page lists ASTM adhesive global standards of relevance to the design-engineering community classified in one of three ways:
• Standard Test Methods
• Standard Test Specifications
• Standard Guides and Practices
Within each group the standards are further classified by substrate type (i.e., wood adhesives, metal adhesives).
Adhesive Standard Test Methods
Wood Adhesives
ASTM D905-03 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D906-98 (2004) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D1101- 97a (2006) Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D2339- 98 (2004) Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D3535-07a Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D4688-99 (2005) Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D5824-98 (2003) Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D7247- 07ae1 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
Metal Adhesives
ASTM D897-01e1 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D903-98 (2004) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D950-03 Standard Test Method for Impact Strength of Adhesive Bonds
ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1062-02 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1184-98 (2004) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D1876-01 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D2293-96 (2008) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D2295-96 (2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
D2919-01 (2007) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
D3165-07 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
D3166-99 (2005) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
D3433-99 (2005) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
D3528-96 (2008) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
D3762-03 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
D5656-04e1 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
Adhesive Standard Test Specifications
Wood Adhesives
ASTM D2559-04 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
ASTM D4689-99 (2005) Standard Specification for Adhesive, Casein-Type
ASTM D4690-99 (2005) Standard Specification for Urea-Formaldehyde Resin Adhesives
ASTM D5572-95 (2005) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM D5751-99 (2005) Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
Adhesive Standard Guides and Practices
Wood Adhesives
ASTM D5266-99 (2005) Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
Metal Adhesives
ASTM D896-04 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D1780-05 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
ASTM D2651-01 (2008) Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D7447-08 Standard Practice for Symbolizing Adhesive Applications
This article is reproduced from Adhesives.org/Sealants.org.